Shimadzu TXB2201L - Page 55

BEFORE
WEIGHING
MAINTENANCE
TROUBLESHOOTING
FOR YOUR
INFORMATION
USING THE
BALANCE
USING MORE CONVENIENTLY
55
Example of registering a "calibration check using the internal weight"
[CAL.EXE] [I.TEST]
Example of registering a "calibration check using the external weight"
[CAL.EXE] [E.TEST]
3
Conrm and return to the weighing
mode.
[SET]
"Span calibration" or "calibration check",
whichever was selected in step
2
, is set for
and the balance returns to the weighing
mode.
When executing "span calibration", see "Span Calibration and Adjustment" (^ page 56).
When executing a "calibration check", see "Calibration Check" (^ page 60).
! !I.T!E!S!T ! !I.T!E!S!T
! !E.T!E!S!T ! !E.T!E!S!T
! !S!E!T! !
When "span calibration using the external weight"
has been selected
! ! !E.C!A!L
•
! !S!E!T! !
When "span calibration using the external weight"
has been selected
! ! !E.C!A!L
•