Shimadzu TXB2201L - Page 65

BEFORE
WEIGHING
MAINTENANCE
TROUBLESHOOTING
FOR YOUR
INFORMATION
USING THE
BALANCE
USING MORE CONVENIENTLY
65
Continued on next page

5
If necessary, enter a weight value.
If no change is to be made, proceed to step 6
without doing anything.
(If necessary, enter a weight value.)
^
"Entering Numerical Values", page 49
For the range of weight values that can be used,
refer to "Specications" (^ page 145).
6
Place the weight on the pan.
Wait until the ashing weight value indication
changes to a ashing zero indication.
*
If "ERR C" is displayed…
The internal weight has not been
calibrated for one of the following
reasons.
The wrong weight has been placed
on the pan.
No operation has been performed
within 60 seconds of the ashing
weight value or zero display.
Press and repeat the operation
from the beginning.


!2!0!0.0!0!0
!2!0!0.0!0!0
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
!2!0!0.0!0!0
!2!0!0.0!0!0
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
! ! !0.0!0!0
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
! ! !0.0!0!0
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/