BEFORE
WEIGHING
MAINTENANCE
TROUBLESHOOTING
FOR YOUR
INFORMATION
USING THE
BALANCE
USING MORE CONVENIENTLY
89
Continued on next page
6
Place the container on the pan
and press
The balance will be tared.
7
Put a quantity of the item to be
counted corresponding to the
selected "number of pieces used
for setting" into the container.
8
Check that (the stability
mark) lights up, then conrm.
[SET]
The unit weight will be set and the number of
pieces of the sample will be indicated.
You can now start piece counting.
^
"Counting Numbers of Pieces", page 90
If you wish to add the unit weight for another
item to be counted, see "Changing a Unit
Weight, or Adding a New Unit Weight"
(^ page 91).
! ! ! ! ! !5 ! ! ! ! ! !5
To Next Page
Loading...
