SICK CLV 45 Series - Fig. 10-32: Dimensions of the Mounting Bracket with Vibration Damper No. 2 031 342; Rod Clamp No. 2 023 691

Operating Instructions Chapter 10
CLV 45x Bar Code Scanner
Appendix
8 009 139/K949/06-06-2002
©
SICK AG · Division Auto Ident · Germany · All rights reserved
10-55
10.12.3 Rod clamp No. 2 023 691
10.12.4 Mounting bracket with vibration damper No. 2 031 342
Fig. 10-31: Dimensions of the rod clamp No. 2 023 691
Enclosed to fasten the CLV:
– 3 pan-head screws M 5 x 8 mm,
Hex-head cap w/s 3 mm, self-locking
– 3 spring washers A5
Fig. 10-32: Dimensions of the mounting bracket with vibration damper No. 2 031 342
Enclosed to fasten the CLV and the bracket:
– 3 pan-head screws M 5 x 8 mm,
Hex-head cap w/s 3 mm, self-locking
– 3 spring washer A5
– 2 hexagon screws M 5 x 16 mm
– 2 washers A5.3