Chapter 10 Operating Instructions
CLV 45x Bar Code Scanner
10-56
©
SICK AG · Division Auto Ident · Germany · All rights reserved 8 009 139/K949/06-06-2002
Appendix
10.13 Supplementary documentation
Order No. Title Contents
2 022 890 Technical documentation set – Operating instructions CLV 45x, German and English
– 1 CD-ROM with "CLV-Setup" software, "CLV-Setup Help" online help
and "I-ViewPro
TM
" HTML-Browser
– Card with 12 printed Profile bar codes
8 008 292 Operating Instructions "AMV/S 40" Description for wiring the CLV to the SICK network/PLC/sensor via the
AMV 40 connection module
8 009 154 Operating Instructions "AMV 70/71" Description for wiring the CLV to the host/PLC/sensor via the AMV/S 70
connection module
8 008 879 Operating Instructions "AMV 100/200" Description for connecting two (four) CLV to the host/PLC/sensor via the
AMV 100 (AMV 200) connection module
8 007 675 Technical Information
"Master/Slave with CLV bar code scanner"
Description of the structure of a "daisy-chain configuration"
(master/slave or data forwarding)
8 007 157 Technical Description
"CLX 200 Network Controller"
Description of the structure of a SICK Network (RS 485) with
CLV bar code scanners
8 008 825 Operating Instructions
"BMV/BMH 10 for Profibus-DP"
Description for connecting the CLV to the Profibus/PLC/sensor via the
BMV/BMH 10 bus connection module
8 008 972 Operating Instructions
"BMV/BMH 10 for DeviceNet"
Description for connecting the CLV to the DeviceNet/PLC/sensor via the
BMV/BMH 10 bus connection module
8 007 546 Technical Information
"BMS 10/20 for Interbus-S"
Description for connecting the CLV to the Interbus-S/PLC/sensor via the
BMS 10/20 bus connection module
8 009 398 "BMV/BMH 10 for Ethernet"
operating instructions
Description of the connection of the CLV to the Ethernet/the PLC/the
sensor via the bus connection module BMV/bus module BMH 10
8 009 180 Operating Instructions
"Application of the CAN interface"
Description of the building a CAN Scanner Network (connection, configu-
ration of the CLV, functions) as well as the integration of the CLV into a
general CANopen network
On request "Command strings" Description of the command strings for the functions of the CLV
Table 10-15: Supplementary documentation in English