Important Information
FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG 13
Subject to change without notice
1.7 Dangers due to heavy loads
The FLOWSIC600 measuring system must be safely attached to the carrying structure
when being transported and installed.
1.8 Environmental information and instructions for disposal
The FLOWSIC600 components are easily disassembled and do not contain toxic, radioac-
tive or any other environmentally hazardous materials. The instrument consists primarily of
steel, stainless steel, plastic and aluminium, and consequently there are few restrictions
for disposal, except for the printed circuit boards, which must be disposed of as electronic
scrap.
WARNING:
● Only use lifting gear and equipment (e.g. lifting straps) which is suitable for
the weight to be lifted. Max. load information can be found on the type plate
of the lifting gear.
● The eye bolts attached to the meter body are suitable for the transport of
the measuring device. However, additional loads (e.g. blind covers, filling
for pressure tests or associated piping) must not be lifted and transported
together with the measuring system without the use of additional support
from the lifting gear.
● Never attach lifting gear to the signal processing unit or its mounting
bracket and avoid contact between these parts and the lifting gear.
To Next Page
Loading...
Need help?
General
