SICK FLOWSIC600

Commissioning
FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG 165
Subject to change without notice
5.9 Sealing
After having completed the commissioning, seal the signal processing unit (if required) in
accordance with the sealing plan (
 pg. 252, 9.9).
5.10 Documentation
The commissioning should be documented with a Commissioning Protocol. The document
"FLOWSIC600 Commissioning Protocol" is content of the FLOWSIC600 shipping on paper
and on the product CD.
 File the completed Commissioning Protocol with the Manufacturer Data Record (MDR)