SICK FLOWSIC600 Technical Information

96 FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG
Installation
Subject to change without notice
4.1 General notes
4.1.1 Delivery
The FLOWSIC600 is delivered in a pre-assembled condition in a sturdy package. When
unpacking the device, check for possible damage in transit. Pay particular attention to the
interior of the meter body, any visible transducer components and the sealing surfaces on
the flanges. Any damage must be documented and reported to the manufacturer
immediately.
Also check the shipment to ensure all components are included. The standard meter ship-
ment is comprised of:
 FLOWSIC600 measuring system (meter body with signal-processing unit and
transducers)
 MEPAFLOW600 CBM operation, configuration and diagnosis software
 Operating Instructions,
 Manufacturer Data Report (MDR)
Figure 43 FLOWSIC600 labels and marks
NOTICE:
To guarantee safe and reliable operation of the measuring equipment, make
sure the actual site conditions match the information provided on the labels on
the meter body and SPU (see
Figure 43).
Type plate at meter body see
 pg. 256, Figure 121
Flange dimensions
Main type plate on the SPU
 pg. 256, Figure 120

SICK FLOWSIC600 Specifications

General

Brand	SICK
Model	FLOWSIC600
Category	Measuring Instruments
Language	English