138 FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG
Commissioning
Subject to change without notice
5.5.5 I / O configuration - terminal assignment (Field setup page 5 of 8)
The terminal assignment contains five tabs for the individual terminals and one for the
overview. In these tabs, the outputs can be specifically configured. For detailed
information on the output signal and for support functions use the information buttons
(when displayed). For the pulse output, use the built in Meter Factor calculator.
Figure 66 Field setup page 5 of 8: I / O configuration - Terminal assignment, tab for terminals 31/32
To Next Page
Loading...
