SICK FLOWSIC600 Technical Information

Commissioning
FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG 127
Subject to change without notice
5.3.4 Online connection: Direct serial
 Choose a meter and click the "Direct serial" button to establish a serial connection to a
meter which is connected to the PC (
 Figure 57).
 Specify the appropriate connection settings in the "Connection settings" window
(
 Figure 57) and click the "Connect" button to establish an online connection to the
meter. If the connection fails, see  pg. 199, 7.4 for troubleshooting.
Figure 57 Connection settings
Button for establishing a direct serial connection
"Connection settings" window
The parameters shown in the "Connection Settings" window in  Figure 57 are
the default values with which the FLOWSIC600 RS485 interface is configured.
The serial COM port must be individually selected.

SICK FLOWSIC600 Specifications

General

Brand	SICK
Model	FLOWSIC600
Category	Measuring Instruments
Language	English