178 FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG
Maintenance
Subject to change without notice
6.4.2 DataLogs check
Starting with firmware version 3.4.00, the FLOWSIC600 provides two DataLogs (Hourly Log
and Daily Log). They save averaged measured values and are stored in the SPU‘s non-
volatile memory (FRAM). All data can be downloaded and exported to Excel files with
MEPAFLOW600 CBM (
pg. 152, on configuring the DataLogs.).
Figure 85 DataLogs page with opened tab for Hourly Logs
Full support for the DataLogs is provided by MEPAFLOW600 CBM V1.1.00 or
higher.
„Meter
Status“
section
for update
for export
To Next Page
Loading...
