SICK FLOWSIC600 Technical Information

Appendix
FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG 237
Subject to change without notice
9.4.2 Acknowledging a logbook entry on the LCD display
1023 DataLog 3 overflow 2
I+DataLog 3 0001
Overflow
I-DataLog 3 0001
Overflow
1024 DatenLog 1 CRC error 2
I+DataLog 1 0001
CRC invalid
I-DataLog 1 0001
CRC invalid
1025 DatenLog 2 CRC error 2
I+DataLog 2 0001
CRC invalid
I-DataLog 2 0001
CRC invalid
1026 DataLog 3 CRC error 2
I+DataLog 3 0001
CRC invalid
I-DataLog 3 0001
CRC invalid
1028 Customer limit exceeded 2
I+Userlimit 0001
Limit XXXXXXXXXX
I-Userlimit 0001
Limits OK
Parameter logbook [3]
1005 Parameter changed 3
I Parameter 0001
Change Reg3001
1006 All parameters to default (Reset) 3
I Parameter 0001
Reset all
1009 Parameter logbook [3] erased and initialized 3
I Logbook 3 0001
Reset and Init
1011 Parameter logbook [3] overflow 3
I+Logbook 3 0001
Overflow
I Logbook 3 0001
Overflow
I Power ON 001
28/12/2007 12:13
Press STEP or DATA to select an entry which has not yet been
acknowledged (display is flashing). Activate the ENTER function to
display the corresponding time stamp of the event. The display is still
flashing. Activate the ENTER function again in order to acknowledge the
entry (display will stop flashing). Return to the list of logbook entries by
pressing C/CE.
<ENTER>
Entry time
28/12/2007 12:13
It is recommended that MEPAFLOW600 CBM be used for the acknowledgment
of logbook entries due to the user-friendly access it provides.
Message No.
on LCD
Details Logbook LCD Text

SICK FLOWSIC600 Specifications

General

Brand	SICK
Model	FLOWSIC600
Category	Measuring Instruments
Language	English