SICK FLOWSIC600

180 FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG
Maintenance
Subject to change without notice
To clear all entries from a DataLog, complete the following steps:
 Go to the DataLogs page (select Meter / DataLogs from menu).
 Choose the Configuration tab (see  pg. 157, Figure 76).
 Switch the meter into Configuration Mode (choose "File / Configuration Mode" from the
menu).
 Click the "Clear" button for the DataLogs from which you want to clear entries.
 Switch the meter into Operation Mode.