SICK FLOWSIC600 Technical Information

210 FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG
Appendix
Subject to change without notice
Outputs and interfaces
Analog output
1 output (optional):
4 ... 20 mA, 200 Ω
Active/passive, electrically isolated
Digital outputs
Up to 3 outputs:
30 V, 10 mA
Passive, electrically isolated, open collector or acc. to NAMUR (EN 50227), 
f
max
= 6 kHz (scalable)
Interfaces
RS-485 (2x, for configuration, measured value output and diagnosis)
Bus protocol
MODBUS ASCII
MODBUS RTU
HART
Operation
Via meter display and software MEPAFLOW600 CBM
Installation
Dimensions (W x H x D) See dimension drawings
Weight Depending on device version
Material in contact with media Low-temperature carbon steel, stainless steel, Duplex steel
Electrical connection
Voltage 12 ... 28.8 V DDC
For active current output: 15 ... 28.8 V DDC
Power input ≤ 1 W
General
Scope of delivery The scope of delivery is dependent on the application and the customer specifications.

SICK FLOWSIC600 Specifications

General

Brand	SICK
Model	FLOWSIC600
Category	Measuring Instruments
Language	English