SICK WebChecker MLG-2 User Manual

2.3 General safety notes
CAUTION
Observe the following to ensure the safe use of the MLG-2 as intended.
The measuring automation light grid must be installed and maintained by trained, quali‐
fied personnel with knowledge of electronics, precision engineering, and
control programming. The relevant technical safety standards must be observed.
All persons entrusted with the installation, operation, or maintenance of the devices
must follow the safety guidelines:
•
The operating instructions must always be available and must be followed.
•
Unqualified personnel must stay away from the system during installation and
maintenance.
•
The system must be installed in accordance with the applicable safety regulations
and mounting instructions.
•
The work safety regulations of the employers' liability insurance associations and
trade associations in the respective country must be observed during installation.
•
Failure to observe the relevant work safety regulations may lead to physical injury
or cause damage to the system.
2 SAFETY INFORMATION
10
O P E R A T I N G I N S T R U C T I O N | MLG-2 WebChecker 8024643/2019-09-02 | SICK
Subject to change without notice

SICK WebChecker MLG-2 Specifications

General

Brand	SICK
Model	WebChecker MLG-2
Category	Measuring Instruments
Language	English