EasyManuals Logo
Home>SICK>Measuring Instruments>WebChecker MLG-2

SICK WebChecker MLG-2 User Manual

SICK WebChecker MLG-2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
2 Safety information
2.1 Requirements for the qualification of personnel
The MLG-2 measuring automation light grid must only be mounted, commissioned, and
maintained by authorized personnel.
NOTE
Repair work on the MLG-2 may only be performed by qualified and authorized service
personnel from SICK AG.
The following qualifications are necessary for the various tasks:
Table 1: Authorized personnel
Task Qualification
Mounting
Basic practical technical training
Knowledge of the current safety regulations in the work‐
place
Electrical installation and
device replacement
Practical electrical training
Knowledge of current electrical safety regulations
Knowledge of the operation and control of the devices in
their particular application (e. g., industrial robots, storage
and conveyor systems)
Commissioning, operation, and
configuration
Knowledge of the current safety regulations and of the
operation and control of the devices in their particular
application
Knowledge of automation systems
Knowledge of how to use automation software
2.2 Intended use
The MLG-2 is a measuring automation light grid. The MLG-2 is designed for optical and
non-contact edge detection and width measurement of flexible and rigid sheets of
material.
A measuring automation light grid is designed for mounting and may only be operated
according to its intended function. For this reason, it is not equipped with direct safety
devices.
The system designer must provide measures to ensure the safety of persons and sys‐
tems in accordance with the legal guidelines.
In the event of any other usage or modification to the MLG-2 measuring automation
light grid (e.g., due to opening the housing during mounting and electrical installation)
or in the event of changes made to the SICK software, any claims against SICK AG
under the warranty will be rendered void.
Reasonably foreseeable misuse
The MLG-2 is not suitable for the following applications (this list is not exhaustive):
As a safety device to protect persons, their hands, or other body parts
Underwater
In explosion-hazardous areas
Outdoors, without additional protection
SAFETY INFORMATION 2
8024643/2019-09-02 | SICK O P E R A T I N G I N S T R U C T I O N | MLG-2 WebChecker
9
Subject to change without notice

Table of Contents

Other manuals for SICK WebChecker MLG-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SICK WebChecker MLG-2 and is the answer not in the manual?

SICK WebChecker MLG-2 Specifications

General IconGeneral
BrandSICK
ModelWebChecker MLG-2
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals