EasyManuals Logo
Home>SICK>Measuring Instruments>WebChecker MLG-2

SICK WebChecker MLG-2 User Manual

SICK WebChecker MLG-2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
1 About this document
1.1 Purpose of this document
These operating instructions are for giving technical personnel of the machine manu‐
facturer or operator instructions on the mounting, configuration, electrical installation,
commissioning, operation, and maintenance of the MLG-2 measuring automation light
grid.
These operating instructions do not provide information on operating the machine into
which a measuring automation light grid is integrated. For information about this, refer
to the operating instructions of the particular machine.
1.2
Scope
These operating instructions apply to the MLG-2 Pro WebChecker measuring automa‐
tion light grid, referred to merely as the MLG-2 in the following.
1.3 Target group
These operating instructions are intended for planning engineers, developers, and oper‐
ators of plants and systems into which one or more MLG-2 measuring automation light
grids are to be integrated. They are also intended for people who integrate the MLG-2
into a machine, carry out its commissioning, or who are in charge of maintenance.
1.4 Information depth
These operating instructions contain information about the MLG-2 measuring automa‐
tion light grid on the following topics:
Mounting
Electrical installation
Commissioning and configuration
Care
Fault diagnosis
Part numbers
Conformity and approval
When planning and using a measuring automation light grid such as the MLG-2, techni‐
cal skills are required that are not covered by this document.
The official and legal regulations for operating the MLG-2 must always be complied
with.
NOTE
Please also refer to the SICK AG website: www.sick.de.
1.5 Symbols used
Recommendation
Recommendations are designed to assist you in the decision-making process with
respect to the use of a certain function or a technical measure.
NOTE
Notes inform you about special aspects of the device.
O, Ö, o
LED symbols describe the status of a diagnostics LED. Examples:
O
The LED is illuminated continuously.
ABOUT THIS DOCUMENT 1
8024643/2019-09-02 | SICK O P E R A T I N G I N S T R U C T I O N | MLG-2 WebChecker
7
Subject to change without notice

Table of Contents

Other manuals for SICK WebChecker MLG-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SICK WebChecker MLG-2 and is the answer not in the manual?

SICK WebChecker MLG-2 Specifications

General IconGeneral
BrandSICK
ModelWebChecker MLG-2
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals