3
"Graphic display of the position and attenuation” area: Measurement field
width with objects, measured edges, calculated center positions between 2
edges, attenuation (opacity)
4
“Graphic display of widths” area: Calculating widths with measurement field
width
10.3.2 “Details” area
You can open and close the “Details” area. This area corresponds to the “Application”
area on the "Start” page.
More information:
•
see "“Start” page", page 59
10.3.3 Menus
You can open and close the menus.
More information:
•
Description of the menus: see "Enhanced Sensing – menus", page 67
10.3.4 “Graphic representation of the position and attenuation” area
This area corresponds to the “Graphic display of the position and attenuation” area on
the "Start” page.
The “Eye” button and the histogram of the Q switching outputs and inputs is only avail‐
able on the “Start” page.
Additional information
•
see "“Start” page", page 59
10 CONFIGURATION WITH SOPAS
66
O P E R A T I N G I N S T R U C T I O N | MLG-2 WebChecker 8024643/2019-09-02 | SICK
Subject to change without notice