SICK WebChecker MLG-2

2. Mount brackets for the receiver. Screw tightening torque: 5 to 6 Nm. All brackets
must be aligned in order to be able to turn the receiver.
3. Insert the sender and receiver into the brackets.
4. Align the sender and receiver with each other.
5. Clean the position of the sender and receiver. Screw tightening torque:
2.5 to 3 Nm
MOUNTING
5
8024643/2019-09-02 | SICK O P E R A T I N G I N S T R U C T I O N | MLG-2 WebChecker
37
Subject to change without notice