SICK WebChecker MLG-2 User Manual

5 Mounting............................................................................................. 30
5.1 Scope of delivery....................................................................................... 30
5.1.1 MLG-2....................................................................................... 30
5.2 Recommended mounting arrangements................................................ 30
5.2.1 Mounting with light in opposite directions............................. 30
5.2.2 Mounting with light in the same direction.............................. 30
5.2.3 Minimum distance from reflective surfaces.......................... 32
5.3 Mounting procedure................................................................................. 33
5.3.1 Mounting the QuickFix bracket............................................... 34
5.3.2 Mounting the FlexFix bracket.................................................. 36
6 Electrical installation........................................................................ 38
6.1 Connect the sender and receiver............................................................ 38
6.2 T-connector for MLG-2 connection.......................................................... 41
7 Commissioning.................................................................................. 44
7.1 Putting the MLG-2 into operation............................................................ 44
7.2 Aligning sender and receiver.................................................................... 44
7.3 Performing sensor teach-in...................................................................... 45
7.4 Performing material teach-in................................................................... 46
7.5 Calling up teach-in quality and process quality...................................... 46
8 Operating MLG-2 via control panel................................................. 48
8.1 Activating and deactivating pushbutton lock.......................................... 48
8.2 Aligning sender and receiver.................................................................... 48
8.3 Performing sensor teach-in...................................................................... 49
8.4 Performing material teach-in................................................................... 49
8.5 Reset to factory settings.......................................................................... 50
9 Commissioning via SOPAS.............................................................. 51
9.1 Preparation................................................................................................ 51
9.1.1 Installing the software............................................................. 51
9.1.2 Device selection....................................................................... 51
9.2 Setting up MLG-2 (installation assistant)............................................... 51
9.3 Setting up edge measurement................................................................ 57
9.4 Parameterizing functions: Calculation of width and center positions... 57
9.5 Other configurations................................................................................. 58
10 Configuration with SOPAS................................................................ 59
10.1 “Start” page.............................................................................................. 59
10.1.1 Overview................................................................................... 59
10.1.2 “Device” area........................................................................... 59
10.1.3 “Application” area.................................................................... 60
10.1.4 “Graphic display” area............................................................. 61
10.2 “General Device Settings” page............................................................... 63
10.2.1 Overview................................................................................... 63
CONTENTS
4
O P E R A T I N G I N S T R U C T I O N | MLG-2 WebChecker 8024643/2019-09-02 | SICK
Subject to change without notice

SICK WebChecker MLG-2 Specifications

General

Brand	SICK
Model	WebChecker MLG-2
Category	Measuring Instruments
Language	English