SICK WebChecker MLG-2 User Manual

°
The contrast of the edge
°
The homogeneity of the material
°
The distance to the next edge
°
Potential spurious edges
•
The teach-in quality depends on the alignment of the MLG-2 and the cleanliness
of the front screens. The value remains until another teach-in process is carried
out.
Process quality (quality of run, QoR)
•
The process quality indicates the quality of the light level currently being received.
The MLG-2 analyzes the quality of the current edges and compares this to the val‐
ues after the last material teach-in process.
Depending on the MLG-2 variant and from the parameterization, you can call up the
teach-in quality and the process quality as follows:
•
SOPAS ET
•
RS-485
•
IO-Link
•
Switching outputs
COMMISSIONING 7
8024643/2019-09-02 | SICK O P E R A T I N G I N S T R U C T I O N | MLG-2 WebChecker
47
Subject to change without notice

SICK WebChecker MLG-2 Specifications

General

Brand	SICK
Model	WebChecker MLG-2
Category	Measuring Instruments
Language	English