About this document
11
Building Technologies 001260_k_en_--.doc
Fire Safety & Security Products 02.2005
1 About this document
Purpose
This document describes the function of hardware modules of the control unit
CS1140. The consistent adherence to these instructions ia a prerequisite for a safe
application.
Scope
This document contains information for all modules CS1140, valid for all software
versions.
Target groups
This product documentation and the work instructions are aimed at the following
persons, who have a particular function and have the corresponding training and
qualification.
Group of persons Activity Qualification
Project Manager The project manager is responsible for the local
project management. His co-ordinates the schedules
of all groups of people working on a project as well
as resources. He also continuously obtains the
technical information required for project realization.
He has had the technical training appropriate to
his function and the size of a project or the
product line used in the project and has at-
tended the training courses for project manag-
ers at the supplier’s works.
Installation personnel They install product, device or system components
and subsequently carry out a general performance
check.
Professional training in the field of building
automation or electrical installations.
Commissioning personnel The configuration of the products, devices or sys-
tems for specific customers at the place of installa-
tion.
They check serviceability and officially clear the
product, device or system for use by the operator /
customer. They are also responsible for trouble-
shooting.
They have had the professional training appro-
priate to their function and to the commission-
ing of the products, systems and devices and
have attended the technical training courses for
commissioning personnel.
Product Specialist He programs and parameterizes the product to
comply with the requirements for specific countries
and customers. He provides support in the solving of
technical problems and supports all groups of people
when product faults arise.
He has had technical training appropriate to his
function and has attended the technical training
courses for product specialists at the supply
plant.
Reference documents
Information in Document
1393 Installation housing H26..../H28...
1971 Installation housing H37...
1273 Installation housing H38...
1274 Installation housing H47...
1275 Installation housing H67...
1033, 003128, 003129 Operating instructions AlgoPilot B3Q4../560 EP5
008728 Operating instructions AlgoPilot B3Q4../560 EP7F–Z1
004598 Operating instructions AlgoPilot B3Q6../565 EP7F–Z1
005590 Operating instructions extinguishing section B3Q4.. EP7F
005113 Operating instructions extinguishing section B3Q6.. EP7F
1577 Compact control unit CI1145 EP5
008727 Compact control unit CI1145 EP7F–Z1
1076 Planning (CS1140 ’Modular’) EP5
008725 Planning (CS1140 ’Modular’) EP7F–Z1
1249 Commissioning EP5
008726 Commissioning Hardware EP7F–Z1
1456 Commissioning Extinguishing EP5
005109 Commissioning Extinguishing EP7F
1669 Paging interface card K3I090, Technical manual
1099 Modules overview
825 Connection factors of detection lines
1102 ’Interactive detection line’ connection factors
001508 Connection factors for fire detection systems collective, AnalogPLUS, interac-
tive
To Next Page
Loading...
Need help?
General
