Siemens Cerberus CS1140 - Wiring Principle

K3R071 Mimic Display board (superseded by K3R072)
208
Building Technologies 001260_k_en_--.doc
Fire Safety & Security Products 02.2005
49.4 Wiring principle
Control console and Mimic Display board in the immediate vicinity
4 cable sets Z3I520 (12 cables) per K3R071
K3I050 or B3Q… Equipment 1 Equipment 2
148 148
Data bus Data bus
K1 ST1
K3R071
ST2
K3R071
K1 ST2ST1
AlgoPilot B3Q...
K7 ST4
K3I050
K1 ST2
F12A100: 0.4 m / F12A470: 1.5 m 24 V supply
Mimic Display board separate from the control console
Parallel derivation 4 cable sets Z3I520 (12 cables) per K3R071
K3I050 or B3Q… permissible Equipment 1 Equipment 2
148148
Data bus
Data bus
K3R071
K1 K2 ST2
K3R071
K1 ST1 ST2
AlgoPilot B3Q...
K7 ST4
K3I050
K1 ST2
Adapter Z3I350 max. 1000 m 24 V supply
Note:
– Max. 24 units B3R051 or K3R071 (also mixed) possible with max. 8 different addresses
– remove resistor array except on one unit (–> see page 210)