E3G070 Control module ”universal”
147
Building Technologies 001260_k_en_--.doc
Fire Safety & Security Products 02.2005
36 E3G070 Control module ”universal”
36.1 Overview
z Universal control module for smaller systems (instead of E3X10.)
z 2 contacts for remote transmission ”Alarm and fault”
z 2 monitored control lines for alarm devices with EMI and over voltage protection
z 7 programmable control outputs / inputs
z Monitored supply output for internal devices
z Integrated ground fault monitoring
z Card format 100 mm x 200 mm
z I-Bus address is set at programming switch ”S3”
36.2 Key data
”Remote transmission” contacts max. load
type
24 W (60 V, 1 A),
choice of make / break contact
”Alarm horn line” max. load 2 A (24 V), with EMI protection
Inputs max. load
activation
40 mA (24 V), internal only
via volt-free contact
Supply output max. load 630 mA (24 V), internal only
Terminal block X1 (20 terminals)
– mounted on module chassis
– for the connection of the prefabricated cable to connection level, or
– for direct connection of the periphery
Card chassis
– mounted on module chassis
36.3 Important components
H1
H11
X12
Y12
X13
F2
F3
K2
F5
F4
F9
F8
F7
F6
X60
S3
ST1
S2
F1
K1
ON
1
ON
1
4
1
6
1
2
3
4
5
6
8
9
10
ASIC
I-BUS
Y13
To Next Page
Loading...
