E3G091 Remote transmission interface
163
Building Technologies 001260_k_en_--.doc
Fire Safety & Security Products 02.2005
39 E3G091 Remote transmission interface
39.1 Overview
z Interface for remote transmission equipment with several alarm criteria
z Designed for 4 channels
z Enables activation via make or break contact as well as the de-coupled activa-
tion of all channels upon ”Emergency alarm”
z Test LED for each channel (active upon activation)
z Activation upon ”Emergency alarm”
z Card format 100 mm x 100 mm
39.2 Application
Only necessary in systems with several remote alarm criteria
39.3 Key data
Voltage 20...32 VDC
Output contacts 4
Contact load 30 VA
Quiescent current at 24VDC 0 mA
max. current 100 mA
Terminal block X15 (20 terminals)
– mounted on module chassis
– for the connection of the prefabricated cable to connection level, or
– for direct connection of the periphery
Card chassis
– mounted on module chassis
39.4 Important components
Y1
Y
X
S1
K1
K2
K3
K4
Y6
H3
1
2
3
4
5
11
6
TEST
H1
H2
To Next Page
Loading...
