Siemens Cerberus CS1140 - K3 N010 RAM Extension Card

K3N010 RAM extension card
58
Building Technologies 001260_k_en_--.doc
Fire Safety & Security Products 02.2005
10 K3N010 RAM extension card
10.1 Overview
z Option for master module E3X100/101
z RAM extension card is addressed in addition to the RAM on the E3X100/101
z Requires special EPROM set CCW00xxx
10.2 Application
For larger systems (table of quantities) with station type CC1143
Processing capacity see document ’Planning’ (1076 EP5, 008725 EP7F-Z1)
10.3 Key data
RAM size 1 M Byte (8 x 128kx8Bit)
10.4 Mechanical design
cheese-head screw M2x8
washer (metal)
Ø 5x2.2x0.3
washer (laminated fibre)
Ø 6x2.5x0.5
washer (laminated fibre)
Ø 6x2.5x0.5
washer (metal)
Ø 5x2.2x0.3
cheese-head screw M2x8
spacer bolt M2, L=16
ST10
10.5 Connection
K3N010
Stecker
ST1
Data Bus
E3X100/101
96 Pin
ST10
96 Pin