Planning the networking of the stations
Access components/function and access type
8
102 | 242
8.3.1 Access to the standalone station
Figure 39: Example of ↑ standalone station
Local access
Item no. Designation/function Address
Ethernet connection
Notes
1 ↑ Standalone station 192.168.200.1 –
2 Ethernet connection – –
3 ● Uploading, downloading
● Initializing the ↑ station
● Updating the firmware
● SintesoView
192.168.200.5
Ethernet client is configured to automatically
reference an IP address
Table 23: Local access
Access via ↑ GAP
The ↑ standalone station must be configured as GAP for this access type. A
↑ management station can only receive local access via a GAP station.
Item no. Designation/function Address
Ethernet connection
Notes
1 ↑ GAP station (standalone) 192.168.201.1
Configured as GAP with DHCP server
function
2 Ethernet connection – –
3 ● Uploading, downloading
● SintesoView
● Management station
192.168.201.5
Ethernet client is configured to automatically
reference an IP address
Table 24: Access via GAP
Access via address
Item no. Designation/function Address
Ethernet connection
Notes
1
↑ GAP station (standalone)
and router
192.168.100.1
Configured as GAP without DHCP server
function (sample address)
2 Ethernet connection – –
3 ● Uploading, downloading
● SintesoView
● Management station
192.168.100.100
Sample address, manually configured (in
the same address range as IP address for
GAP station)
Table 25: Access via address
1
2
To Next Page
Loading...
