Siemens FS20 - Mounting Kit (Switch) FHA2029

Planning housings and mechanical components
Mounting kit (switch) FHA2029
6
58 | 242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
6.9 Mounting kit (switch) FHA2029
The mounting kit (switch) FN2029 is required to mount the Ethernet switch
(modular) FN2012 in a way that is VdS-compliant. The mounting kit (switch)
contains two different mounting brackets including all mounting accessories and
necessary cable kits.
Figure 15: View of mounting kit (switch) FHA2029 with small and large mounting brackets
Using the mounting brackets
Small mounting bracket (figure on left)
● For all empty housings for wall mounting
● For stations in the Comfort housing with free installation position
Large mounting bracket (figure on right)
● For stations in the Large housing with free choice of installation position
● For FC2080 in 'housing (19", pedestal cabinet)'
You will find detailed information on mounting in document 008851, chapter
Ethernet switch (modular) FN2012.