Siemens FS20 - Internal Access to Extended Network Via GAP

Planning the networking of the stations
Access components/function and access type
8
106 | 242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
Item no. Designation/function Ethernet address
↑ SAFEDLINK
address
Notes
8 SAFEDLINK sub-net 2 – 192.168.2.x
IP address range for sub-net 2 (pre-
setting, can be changed)
9
Ethernet switch
(modular) FN2012
– – –
10 Ethernet connection – – –
11
● Uploading,
downloading
● Initializing the
↑ station
● Updating the
firmware
● SintesoView
192.168.200.5 –
Ethernet client is configured to
automatically reference an IP
address (see item 1)
Table 29: Local access to extended network
8.3.4 Internal access to extended network via GAP
The PC is connected to any point in the FCnet/LAN. All ↑ stations can then be
reached via the ↑ GAP. The GAP must be in the FCnet/LAN.
Figure 42: Example: Internal access to extended network via ↑ GAP
1
2
3 4
2
3 4
5
6
7
8
9
10
11
9
9
9
9