Determining the compact stations
Defining the hardware for the stations
11
167 |
Building Technologies
11.4.3 Determining the station options
Define the ↑ station options with the aid of the table below.
Use Required option Notes
Additional mounting level for fitting
options or products from a third party
(e.g. fire brigade periphery module)
Mounting plate FHA2007-A1
● Only one mounting plate
can be built into each
↑ station.
● No mounting plate can be
installed in the Eco
housing.
Additional installation of LED indicators
for 48 detector zones
● Operating add-on with 2 LED
indicators (internal) FCM2006-A2
● Operating add-on with 2 LED
modules FCM2038-A2
Delivered without housing (for
replacement with operating
add-on empty)
Additional installation of LED indicators
for 96 detector zones
● Operating add-on with 4 LED
indicators (internal) FCM2007-A2
● Operating add-on with 4 LED
modules FCM2036-A2
Delivered without housing (for
replacement with operating
add-on empty)
Power supply (70 W) Power supply (70 W) FP2015-A1
Delivered with cable kit and
terminals
Power supply (150 W)
Power supply kit (150 W, A),
FP2004-A1
For empty housing, incl. cable
kit
Additional power supply (150 W)
Power supply kit (150 W, B),
FP2005-A1
For parallel connection with
available power supply
(150 W), incl. cable kit
Table 52: Options of the stations
11.4.4 Determining the housing options
With the aid of the table below, determine the options for the housing.
Use Required option Notes
Installation in 19" cabinet 19" mounting kit FHA2016-A1 ● Fits into all housings
● Delivered in pairs
Recessed mounting ● FM blind 1HE FHA2017-A1
(for Eco, Standard and Large
Extension housings)
● FM blind 2HE FHA2015-A1
(for Comfort and Large housings)
● The blind is mounted
instead of the cover cap
● Delivery without sheathing
box
Recess-mounted for CI1145 migration
● Mounting kit (recess) FHA2055-
A1
● For FC2030-CR only
Table 53: Housing options
To Next Page
Loading...
