Siemens FS20 - Mounting Plate FHA2007-A1

Planning housings and mechanical components
Mounting plate FHA2007
-
A1
6
54 | 242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
6.4 Mounting plate FHA2007-A1
The mounting plate can be used in all Standard, Comfort and Large housings.
Components that cannot be mounted elsewhere in the housing (e.g., fire brigade
periphery module or RT interface in the Standard housing) are mounted on the
mounting plate. The mounting plate is mounted above the periphery board
Figure 10: Installation site of mounting plate in Standard housing and Large housing
1 Mounting plate, mounted above the periphery board
2 Fire brigade periphery module, mounted on the mounting plate
2
1
2
1