Siemens FS20 - Management Station or Tool Via GAP

Planning the networking of the stations
Management station or tool via GAP
8
120 | 242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
8.10 Management station or tool via GAP
● A ↑ management station must be connected via the ↑ GAP's Ethernet
interface.
● In the case of SintesoView or SintesoWorks, the GAP is configured as a DHCP
server.
Figure 52: Tool or management station connection via ↑ GAP
1 Management station or SintesoView, SintesoWorks
2 Ethernet connection
3 ↑ GAP and ↑ router station
4 FCnet/SAFEDLINK
5 ↑ SAFEDLINK station
2
3
4
5
1