Siemens FS20 - Interactive Detector Line; Devices that Can be Connected to the Line Card (Interactive)

Planning detector lines
Interactive detector line
7
93 |
242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
7.5 Interactive detector line
7.5.1 Devices that can be connected to the line card (interactive)
The ↑ line card (interactive) FCL2006 is a module bus card which can be used in
fire control panels with a card cage. The purpose of the line card (interactive) is to
migrate interactive line devices in the event of modernizations.
The diagram below shows an example overview of the interactive line devices that
can be connected to the line card (interactive).
Figure 33: Example overview of the line devices that can be connected to the line
card (interactive) FCL2006
1) Collective stub
2) Ex area
3) SynoLINE300C
4) If compatible with AlgoRex EP7 or higher
Topologies
The following topologies are possible at the ↑ line card (interactive):
● 1x loop with a maximum of 128 interactive line devices
● 1x stub with a maximum of 32 interactive line devices
● Sub-stub on ↑ loop or ↑ stub possible
● Sub-stub on sub-stub is possible
● Separate supply output for input/output modules
Card cage
FCL2006
1)
2)
DO115x
DJ1192
DM115x
DMA1153
DC1192
SB3
DO1101-Ex
DT1101-Ex
DF1101-Ex
DC1192 DC1192
1)
DS11
3)
CB320A
OH320C
HI320C
DOT115x
DT115x DF1191
DF1192
DC115x
DC115x
DOW1171
DC1192
DC1157-AA
DLO1191
DLR11
DCW1151
1)
4)