Siemens FS20 - Mounting and Installation of Compact Control Panels; Mounting Procedure

Planning detector lines
Planning a
n FDnet detector line
7
59 |
242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
7 Planning detector lines
7.1 Planning an FDnet detector line
Purpose
During planning of the ↑ detector lines, the load of the ↑ line card is verified. This
produces the following:
● Number and type of devices per detector line
● Number of required line cards
● Number of ↑ loops and ↑ stubs
The planning of the detector lines can be performed as follows:
● With the ↑ outline quantities tool FX2010 (recommended)
● Limited, with these instructions
Planning with the ↑ outline quantities tool FX2010 (document
009716)
The outline quantities tool is an Excel spreadsheet (see diagram), which enables
quick and easy planning.
The system limitations are not contained in the outline quantities tool. They must
be taken from this document.
Figure 16: Outline quantities tool