Siemens FS20 - Housing with Plan Compartment

Planning housings and mechanical components
Housing for wall mounting
6
51 |
242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
Empty housing
All housings are also available as 'empty' housings. Empty housings are used to
install other devices and options. Examples include:
● Operating add-on
● Separate decentralized supply
● Extra batteries
● Extra devices on DIN rail such as relay, transponder etc.
Empty housings consist of the following parts:
● Eco, Standard, and Large Extension housings
– Rear panel
– Carrier plate with foil
– Cover cap
● Comfort and Large housings
– Rear panel
– Two carrier plates with foil
– Two cover caps
6.1.1 Housing with plan compartment
To keep building ground plans for the fire brigade, the ↑ stations and empty
housings are available with plan compartments. The plan compartments are built in
the operating add-on (lower housing part) [CH], [FI], [SE] or are available in a
separate housing (Eco, Standard).
The following plan compartment types are available:
● A4 plan compartment [CH]
● A3 plan compartment [FI], [SE]
The plan compartments restrict the size of batteries that can be installed.
↑ Station with plan compartment A4
in housing (Comfort)
Example:
● FC2020-CC [CH]
● FC2040-CC [CH]
Station with plan compartment A3
in housing (Large)
Example:
● FC2020-BB [FI], [SE]
● FC2040-BB [FI], [SE]