Siemens FS20 - Installing an Ethernet switch (modular) FN2012

System limits
System
limits with PMI & mainboard FCM2004
10
142 | 242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
10.3 System limits with PMI & mainboard FCM2004
Observe the following table when planning to upgrade existing ↑ stations with
PMI & mainboard FCM2004 to MP-EN 4.0.
Topic Comment
Future SW upgrade path
The PMI & mainboard FCM2004 is only compatible with firmware up
to MP3.0.
The service path of MP-EN 4.0 will be MP-EN 5.0.
Possible service releases for FCM2004 and/or for MP1.x, MP2.1, or
MP3.0 are created based on MP3.0.
FC2060 Not applicable
FC2030 / FC2040 and ↑ BACnet (e.g.,
connection to management system)
Not applicable
↑ Extended networking Not applicable
Table 40: System limits with PMI & mainboard FCM2004
'
Stations
' are currently supplied with FCM2027. The FCM2027 is not compatible
with firmware below MP3.0. In contrast to the FCM2004, the FCM2027 has a
shield plate on the rear.
You will find detailed information on the PMI & mainboard FCM2027 in document
Product data 008837.