Siemens FS20 - Collective Detector Line; Devices that Can be Connected to the Line Card (Collective)

Planning
detector lines
Collective detector line
7
85 |
242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
7.2 Collective detector line
7.2.1 Devices that can be connected to the line card (collective)
↑ Line card (collective) FCL2002-A1 allows collective fire detectors to be
connected to fire control panels with a card cage. The line card (collective) is
mainly used for the migration of existing collective detector lines.
The following diagram shows the collective devices most commonly used in an
existing detector system which are supported by the line card (collective).
Figure 30: Devices most frequently used on the line card (collective) FCL2002-A1
The line card (collective) is inserted in the card cage of the fire control panels and
is automatically detected by the system.
FDSB292
FDF241-9
FDL241-9
Transzorb
EOL22(Ex)
OP364C
DBZ1195A
DLO1191A
DF1192
EOL22(Ex)
AI30/31
EOL22(Ex)
R910 / R925
R930 / R970
Z94D
F905 / F906
F910 / BR910
F930
AT50
EOL22(Ex)
Z74A
F715
F716 / BR16
Z74A
R716 / BR17
EOL22(Ex)
D2401 / D2417
A2400
S2406
SPB3
FDB201
FDB201-AA
FDB202
FDOOT241-9
FDOOT241-A9
DJ1192
DB1101A
DO1101A
DB1101A
Z94D
24VDC
DC1192
DCA1191
SB3
Z3I410
DB1101A
DB1101A
DO1101A-Ex
DT1101/02A-Ex
DF1101-Ex
KMK6
DT1101
DT1102
SDT210
Card Cage
FCL2002-A1