Planning the networking of the stations
Special features of SAFEDLINK networking with FC2080
8
114 | 242
Fire control panel FC2080 in the ↑ FCnet/SAFEDLINK network
The network modules of the FC2080 are integrated on the ↑ CPU card (FC2080)
and the communication card (FC2080) and are connected as shown.
Only two network modules (SAFEDLINK, CC) may be loaded in the FC2080. In
the case of dual CPU operation, the network module must be removed from the
communication card and plugged into the second redundant ↑ CPU card.
Figure 47: Example of networking variants for the FC2080
1 ↑ FCnet/SAFEDLINK network
2
↑ SAFEDLINK connection principle for FC2080 without operating unit via
↑ CPU card and communication card
3
SAFEDLINK connection principle for FC2080 with optional operating unit, via
the communication card, network module (SAFEDLINK), operating unit and
CPU card
You will find detailed descriptions of the wiring in the documents on product data
008837 and installation 008851. See chapter 'Applicable documents'.
See also
2 SAFEDLINK networking [➙ 108]
2 Fiber optic cable network module (SM/MM)
FN2006/FN2007 [➙ 110]
2 Repeater (SAFEDLINK) FN2002-A1 [➙ 111]
2 Interface module DL485/13-xx-ST-SBT [➙ 112]
1
3
2
To Next Page
Loading...
