1
13 |
Building Technologies
Version Edition date Brief description
Changes and additions:
● Specifications for firewall updated in 'Remote access' chapter.
● Order numbers for FC2080 – Installable components: Type designation of line
cards corrected (FCI -> FCL), order changed.
● FC2080: I/O card (programmable) FCI2008, max. 37 can be used.
● Addition to station overview: 'Number of device addresses (total)', values
added.
● Battery size limited to max. 65 Ah due to weight in housings (Large) and
(Large Extension).
● Information on BACnet and BACnet third-party products revised in chapter
'License keys'. Chapter 'Determining additional compact station components'
revised.
● Referenced documents updated.
● Phased-out line devices removed: FDF221-9, FDV241.
● Fire control panel FC2030 supports a total of 24 floor repeater terminals and
floor repeater displays.
● Fire terminal (Touch) FT2080, desktop housing (FT2080), and rear cover
(FT2080): Information on mains filter removed.
● Order number of the fire terminal board FTI2001 added to 'Order numbers' -
'Desktop housing' chapter
● Information on I/O module and fire dampers added to 'System limits' – 'Outline
quantities for hardware' chapter.
● Power supply kit (70 W) FP2003-A1 replaced by power supply unit (70 W)
FP2015-A1.
● FCnet/Ethernet networking modified to max. 14 stations over Ethernet.
'Networking via SAFEDLINK and Ethernet' and 'Guidelines' chapters.
● FC2080 supply concept modified: Negative 24 V connection inserted between
two carriers (19", power supply).
● Chapter 'Line separation function': Text added stating that a stub is permitted
at the start/end of the loop.
● Data rate corrected to 115 and 315 kbit/s in 'SAFEDLINK networking' chapter
and subchapter and in 'Cable specification for SAFEDLINK' chapter.
● Maximum number of BACnet clients changed to a total of 64, PX controller
added as BACnet client in 'Guidelines for BACnet connections' chapter.
To Next Page
Loading...
