1
15 |
Building Technologies
Version Edition date Brief description
q 03.2012 Edition for MP-EN 4.0
General changes
● New chapter 'System limits with PMI & mainboard FCM2004'
● PMI & mainboard FCM2004 is no longer supported in FC2040 together with
management system
● Max. 252 addresses per FDnet loop
● Option of importing detection tree
● Option of monitored contact input with FDCIO223
Integration of the fire control panel FC2080 and associated components:
● Processor unit (19", FC2080) FCC2002-A1
● CPU card (FC2080) FCC2004-A1
● Communication card (FC2080) FCC2005-A1
● Network module (SAFEDLINK, CC) FN2010-A1
● I/O card (remote transmission) FCI2007-A1
● New peripheral devices: SWING, FDSB221, FDSB229
● Key safe adapter connection for FC2080 and FG2020
Fire control panels FC2030, FC2060, C2080:
● I/O card (horn/monitored) FCI2009-A1
● I/O card (programmable) for FC2030 too
● Planning for monitored outputs in the chapter Controls
● Fiber optic cable network module (SM/MM) FN2006-A1/FN2007-A1
FG2020:
Overview and reference to the Technical manual A6V10281424
Revised:
Chapter structure
p 08.2010 'Connection factors of the FDnet devices' chapter revised
Minor corrections in the following chapters: 'Restrictions on extended networking',
'Redundant networking'
o 07.2010 'Restrictions on extended networking' chapter revised
n 05.2010 Third edition MP3.0
● Revision history redefined and standardized
● Integration of PMI & mainboard FCM2027-A1
● Revised network planning
● Various minor corrections
m 03.2010 Second edition MP3.0 for VdS
Assignment of manufacturer designation 'Scalance' to BT designation
l 10.2009 First edition MP3.0 for VdS
● Extended networking via optical Ethernet
● Scalance Ethernet Switch X204-2
● Scalance firewall/router S612
k 02.2009 Fifth edition MP2.1
● Operating add-on FCM2015-D1 removed
● Collective detector lines revised
● Various minor corrections
To Next Page
Loading...
