13
198 | 242
Designation Type Order number Notes
Fiber optic cable network module
(MM)
FN2007-A1 S54400-A110-A1 Incl. plug set (Phoenix PSC)
Repeater (SAFEDLINK) FN2002-A1 S24236-B2502-A1 Max. 1 between 2 stations
Requires external supply
RS232 module (isolated) FCA2001-A1 A5Q00005327
Essential for the event printer
FTO2001
RS485 module (isolated) FCA2002-A1 A5Q00009923
Connection for remote EVAC-NL,
UGA [FR]
Cable kit (communication) FCA2014-A1 A5Q00023027
Cable kit (communication) FCA2014-
A1 (2 shield connection terminal
blocks, 8 cable clamps and 4
shielded, pre-configured cables on
one terminal strip)
Power supply (70 W) FP2015-A1 S54400-B121-A1 ● For fire terminal
● For EN 54 power supply in
separate housing
● Power supply (70 W) incl. cable
and installation materials
Power supply kit (150 W, A) FP2004-A1 A5Q00020825
For EN 54 power supply in separate
housing
Power supply kit (150 W, B) FP2005-A1 A5Q00018779
For connection in parallel to existing
power supply
Mounting plate FHA2007-A1 A5Q00010151 Not for Eco housing
Fire brigade periphery module [DE] FCI2001-D1 A5Q00013100
With FC2030 and FC2060 a
mounting plate FHA2007 is also
needed for this component.
For FC2020 and FC2040 this
component can be fitted next to the
periphery board.
Not for FC2080
Door contact kit [DE] FCA2009-A1 A5Q00012317 Not for FC2080
RT interface [NL] FCI2005-N1 A5Q00026302
RT interface [CH] FCI2006-C1 A5Q00027094 Pre-mounted kit with mounting plate
Relay module Z3B171 4843830001 Relay with 1 changeover contact
Sounder module FCA2005-A1 A5Q00014866 Splits sounder into 4 outputs
Battery kit 9 V [FR] FCA2010-A1 A5Q00012569 Without battery
Operating add-on (2x LED
indicator)
FCM2038-A2 S54400-B146-A1 LED indicators (red/green, yellow)
Operating add-on (4x LED
indicator)
FCM2036-A2 S54400-B147-A1 LED indicators (red/green, yellow)
Operating add-on (2xEVAC term.) FCM2008-N1 A5Q00022046
Operating add-on with 20-zone
EVAC indicator
Table 69: Ordering details for options for installation in stations
To Next Page
Loading...
