Simrad ST90 - Page 168

166
457420/A
•ToExternal:ThisfunctionisnotimplementedontheST90.
•ToFile:SelectToFiletosavethecurrentlyselectedobjectstoale.Thelename
isbuiltautomaticallyusingdateandtimeinformation.
•FromFile:SelectFromFiletoretrievethepreviouslysavedobjects.TheImport
Markerdialogboxoffersalisttochoosefrom.
Controlbuttons
Intheobjectlist,selecttheobjectlinetoactivatethecontrolbuttonsforthatparticular
object.
APriority
Onemarkercanbegivenprioritystatusto
identifytheobjectasthemostimportant
targetorposition.SelectPrioritytogive
thecurrentlyselectedobjectapriority
status.Ifanotherobjecthasthispriority,
thestatusistransferredtothenewobject.Thepriorityisidentiedwitha"P".
BDisableAlarm
Whenyouaretrackingamovingtarget,certaintargetbehaviourmaytriggeran
alarm.SelectDisableAlarmtodisablealarmsforthecurrentlyselectedtracked
target.
CSuppressAlarmAudio
Whenyouaretrackingamovingtarget,andthetargetbehaviourtriggersanalarm,
youwillhearanaudiosignal.SelectSuppressAlarmAudiotodisabletheaudio.
DAlarmHistory
AllalarmsarepresentedundertheAlarmstabintheMessagesdialogbox.Select
AlarmHistorytoopentheMessagesdialogbox.
Objectinformation
Intheobjectlist,selecttheobjectlinetoretrieveobjectinformationaboutthat
particularobject.Someinformationisonlyavailableforanobjectthatissubjected
totargettracking.
•Position
Twoeldspresentthegeographicalpositionofthecurrentlyselectedobject.
•Course/Speed
Inthelistofobjects,selectanobjectonwhichyouhavestartedtargettracking.
Twoeldspresentthecourseandspeedofthetrackedtarget.
SimradST90OperatorManual