582
Macro File Editing Rules
Appendix (Volume 2)
KeyCut ME? ME1 to ME4, PP Control blocks on the applicable bank
Key? Key1 to Key8 Key of the applicable independent key
transition control block
Direction? ToOn (a),
ToOff (b),
Any (c)
Transition execution mode
(a): Key is inserted
(b): Key is deleted
(c): Transition is always executed
Play Device? 1 to 12,
FrameMemory1Clip to
FrameMemory8Clip
Applicable device
Mode? Normal (a),
Recue (b),
Loop (c)
Playback mode
(a): Normal mode
As for Frame Memory 1 Clip to Frame
Memory 8 Clip, settings are ignored
and operation mode is fixed to
“Normal.”
(b): Recue mode
(c): Loop mode
Cue Device? 1 to 12,
FrameMemory1Clip to
FrameMemory8Clip
Applicable device
Timecode? Current (a), hh:mm:ss:ff Start point timecode
hh=hours (00 to 23)
As for Frame Memory 1 Clip to Frame
Memory 8 Clip, hh is fixed to “01.”
mm=minutes (00 to 59)
ss=seconds (00 to 59)
ff=frames (00 to 29)
(a): Mode in which the currently set
timecode is used
Stop Device? 1 to 12,
FrameMemory1Clip to
FrameMemory8Clip
Applicable device
FF Device? 1 to 12,
FrameMemory1Clip to
FrameMemory8Clip
Applicable device
Rewind Device? 1 to 12,
FrameMemory1Clip to
FrameMemory8Clip
Applicable device
DiskFileLoad Device? 1 to 12 Applicable device
FileName? File Name Name of file being set (max. 23
characters)
Snapshot Region? ME1 to ME4, PP, User1 to
User8, DME1 to DME8,
Router
Applicable region
Register? 1 to 99 Applicable register number
Attribute? Off, Dissolve,
AutoTransition,
Dissolve&AutoTransition
Applicable snapshot attributes
Time? Current (a), 0 to 999 Duration of effect dissolve (number of
frames)
(a): Mode in which the currently set
value is used
KeySnapshot ME? ME1 to ME4, PP Control blocks on the applicable bank
Key? Key1 to Key8 Applicable key
Register? 1 to 4 Applicable register number
Symbol Parameter name Arguments Description
To Next Page
Loading...
