597
Error Messages
Appendix (Volume 2)
Icon Message Description
Activate License
The license key you entered is invalid.
Please check and enter again.
7316.7: Engineering Setup >System >Install/Unit Config >License
>License Management
In the above menu, since the entered information was incorrect, the
Activate License procedure failed. Check the license key, and enter
again.
License key was successfully entered.
The license will be activated after rebooting
your system.
7316.7: Engineering Setup >System >Install/Unit Config >License
>License Management
In the above menu, the Activate License procedure completed
successfully.
Append Key Frame
[Append Key Frame] cannot be executed.
FMx is not assigned to a user region.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame], but it failed because the frame memory output (FMx) is not
assigned to a user region.
7331.4: Make the assignment in the Engineering Setup >Switcher
>Config >User1-8 Config menu, and try again.
[Append Key Frame] cannot be executed.
Key Frame Register is locked. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a locked register (UserX region). Unlock the register.
[Append Key Frame] cannot be executed.
Key Frame Register is busy. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a register (UserX region) into which files are being
loaded. Try again after file loading has finished.
[Append Key Frame] cannot be executed.
Key Frame Register is being edited. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a register (UserX region) with which a keyframe
creating or editing operation is proceeding. Try again after the
keyframe operation has finished.
[Append Key Frame] cannot be executed.
Key Frame Register is full. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a register (UserX region) in which no keyframe
remains.
[Append Key Frame] cannot be executed.
Key Frame Register is not active.(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Append Key
Frame] using a register for which the appropriate region selection
button in the numeric keypad control block is not selected. Try again
after you select the region selection button [UserX] in the numeric
keypad control block.
Backup
Success!! 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, saving files into the external hard disk
completed successfully.
Success!!
But the number of folder exceeds the
limit(12) and the files expected for the folders
were backed up in the default folder.
Or the name was changed because it was
the same file name.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, file saving to an external hard disk was
successful, but the limit on the number of folders was reached, and
therefore files were backed up in the default folder. Alternatively, the
file name was changed because a file of the same name already
existed.
External HDD Backup/Restore is running
(–2).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed in the above menu, a backup/
restore operation was being executed with the external hard disk.
FM file auto extraction is running (–3). 2564:Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed in the above menu, extraction of
frame memory file data onto the VTR was being executed.
Clip is recording (–4). 2564:Frame Memory >External Device >Backup to DDR/VTR
In the above menu, an external device is recording clips.
To Next Page
Loading...
