598
Error Messages
Appendix (Volume 2)
FM DDR/VTR Backup/Restore is running
(–5).
2564:Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed in the above menu, a backup/
restore operation was being executed with the VTR/DDR.
No external HDD was found (–2). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Backup] but
the external hard disk could not be recognized. Check that the
external hard disk is correctly connected.
Format operation failed (–10). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed in the above menu, formatting of the
hard disk failed.
Format operation failed (–11).
Cannot access the partition (–12). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Backup] but
the logical drives of the external hard disk could not be accessed.
Check that the external hard disk is correctly formatted.
Cannot access the directory (–20). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Backup] but
the directory of the external hard disk could not be accessed.
Cannot access the directory (–21).
The external HDD is busy (–22). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Backup] to the
external hard disk which was busy and could not be accessed. Try
again after you check that the access lamp of the hard disk or the
indicator of the menu is turned off.
The external HDD is full (–32). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Backup] to the
external hard disk which does not have enough capacity.
Backup operation failed (–33) 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Backup] but
the file storing process was not completed correctly.
Backup operation failed (–34).
Backup operation failed (–36).
Cannot be executed.
Amount of FM files exceeds the capacity of
usable frame memory.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed in the above menu, the number of files
exceeded the storage capacity.
Cannot be executed.
The function requires two frames of frame
memory.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed in the above menu, two files are
required, but there was only one file remaining.
No directory exists (–50). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed in the above menu, the specified
directory does not exist.
Rename operation failed (–52). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed in the above menu, renaming the
directory failed.
Rename operation failed (–53).
Invalid FM OutCh (–6). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if the specified frame memory output channel cannot be
used.
Specified FM OutCh was locked (–7). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if the specified frame memory output channel is locked.
Not enough free register area for Backup or
Restore process (–10).
2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if there is not enough space to carry out the backup.
Prepare failed, not any file was found on this
board (–11).
2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if no image is present.
Backup failed, not prepared yet (–12). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if not yet ready.
Icon Message Description