599
Error Messages
Appendix (Volume 2)
Backup failed, Clip recall failed (–13). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if All One Clip ID Recall failed (internal processing error).
Prepare failed, Clip create failed (–14). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if All One Clip creation failed (internal processing error).
Prepare failed, insufficient Clip id (–15). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if there are not enough Clip IDs (internal processing error).
Prepare failed, symbol files create failed
(–16).
2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if marker frame file creation failed (internal processing
error).
Prepare failed, all one Clip recall failed (–17). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if All One Clip Recall failed (internal processing error).
ERROR (–19). Bad register number. 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if Register Number is invalid (internal processing error).
Prepare failed, because there is clip playing
(–22).
2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message
appears if processing failed during clip playback.
Change Password
The password has been successfully
changed.
7317.1: Engineering Setup >System >Maintenance >Setup
Operation Lock
In the above menu, the password was successfully changed.
Failed.
The password was not changed.
7317.1: Engineering Setup >System >Maintenance >Setup
Operation Lock
In the above menu, the password was not changed.
Create Key Frame
[Create Key Frame] cannot be executed.
FMx is not assigned to a user region.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Create Key
Frame], but it failed because the frame memory output (FMx) is not
assigned to a user region.
7331.4: Make the assignment in the Engineering Setup >Switcher
>Config >User1-8 Config menu, and try again.
[Create Key Frame] cannot be executed.
Key Frame Register is locked. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Create Key
Frame] using a locked register (UserX region). Unlock the register.
[Create Key Frame] cannot be executed.
Key Frame Register is busy. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to [Create Key Frame]
using a register (UserX region) into which files are being loaded. Try
again after file loading has finished.
[Create Key Frame] cannot be executed.
Key Frame Register is being edited. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Create Key
Frame] using a register (UserX region) with which a keyframe
creating or editing operation is proceeding. Try again after the
keyframe operation has finished.
[Create Key Frame] cannot be executed.
There is no free Key Frame. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Create Key
Frame] for a UserX region with insufficient usable keyframes.
[Create Key Frame] cannot be executed.
Key Frame Register is not active. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to execute [Create Key
Frame] using a register for which the appropriate region selection
button in the numeric keypad control block is not selected. Try again
after you select the region selection button [UserX] in the numeric
keypad control block.
Icon Message Description
To Next Page
Loading...
