600
Error Messages
Appendix (Volume 2)
Deactivate License
The license will be deactivated after
rebooting your system.
7316.7: Engineering Setup >System >Install/Unit Config >License
>License Management
In the above menu, the Deactivate License procedure completed
successfully.
Disk Format
Success!! 7317: Engineering Setup >System >Maintenance
In the above menu, removable disk formatting procedure completed
successfully.
Failure.
Make sure of the memory card.
7317: Engineering Setup >System >Maintenance
In the above menu, removable disk formatting procedure failed.
Check that the memory card is correctly inserted.
Error
This operation is cancelled, because the
register is locked.
Please change the register status to be
unlocked first.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store >Edit
6411.1: Shotbox >Register >Store/Recall >Edit
In the above menu, an attempt was made to assign to a register that
is locked. Unlock the register before carrying out the assignment.
The file was not able to be read. 7142.1: File >Shotbox, Macro >File Edit
In the above menu, [Off Line Edit] was pressed but the selected file
could not be read.
Select the file again, and press [Off Line Edit] once more.
It was not possible to make a file. 7142.3: File >Shotbox, Macro >File Edit >Off Line Edit
In the above menu, when storing, the file could not be written.
Try the store once more.
Failed... 7162: File >All, External File >Import/Export
In the above menu, importing a file failed. Check the format of the
original file, and try again.
The Source and the target are the same
directory.
Please change the source or the target
directory.
7172: File >Configure >Unit ID Copy
In the above menu, the same directory and ID were selected for
source and target.
Select a different directory and ID.
Extraction
FM file auto extraction is running (–9). 2542:Frame Memory >File >Auto Extraction
In the above menu, when the [Extraction Start] button is pressed,
this message appears if the CG wipe extraction function is already
being executed.
FM 1394 HDD Backup or Restore is
processing. (–11).
2542:Frame Memory >File >Auto Extraction
In the above menu, when the [Extraction Start] button is pressed,
this message appears if the external hard disk is already active in a
frame memory file data backup/restore operation.
FM DDR/VTR Backup/Restore is running
(–16).
2542:Frame Memory >File >Auto Extraction
In the above menu, when the [Extraction Start] button is pressed,
this message appears if a backup/restore operation using the VTR/
DDR is in progress.
ERROR (–1). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if an internal processing error occurs.
Create thumbnail failed (–2). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if thumbnail creation failed (internal processing
error).
Red Symbol file not match (–3). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is pressed, this
message appears if a red marker frame file is invalid.
Icon Message Description
To Next Page
Loading...
