2-2 Sun Ultra 20 M2 Workstation Service Manual • January 2007
2.1 Planning the Installation Process
Use the following flowchart to assist you with installing the Sun Ultra 20 M2
Workstation.
FIGURE 2-1 Process Flow for Setting Up the Sun Ultra 20 M2 Workstation
Ye s
No
No
Install
optional
components.
Ye s
See Chapter 1.
To install DIMMs, a graphic
accelerator, PCI/PCI-E
cards, hard drives, or a
DVD drive, see Chapter 2.
See Section 2.4, “Powering On the
Workstation” on page 2-6.
See the Sun Ultra 20 M2 Workstation
Installation Guide.
Install your
OS.
To install an optional,
supported OS, see the Sun
Ultra 20 M2 Workstation
Operating System Installation
Guide.
See Section 2.3, “Connecting
External Devices to the
Workstation” on page 2-4.
Unpack the workstation and
familiarize yourself with the
workstation features.
Connect the workstation and
external device cables.
Power on the workstation.
Configure
preinstalled
OS
software?
Configure the preinstalled Solaris 10
Operating System.
Install
optional
components?
READY TO WORK!
START
To Next Page
Loading...
