Chapter 5 Maintaining the Workstation 5-39
5. Unfasten the connectors from the motherboard and release the cable management
straps (see
FIGURE 5-26).
6. Unfasten the power connectors attached to the motherboard, DVD drive, and
storage backplane (see
FIGURE 5-26 and TABLE 5-2).
FIGURE 5-26 Locations of Power Supply Connections on the Motherboard
7. Working from outside the back of the chassis, unfasten the four mounting screws.
TABLE 5-2 Power Supply Cable Connections
Power cable Connector Power cable Connector
P1 Motherboard PWR1 P3 DVD drive
P2 Motherboard PWR2 P4 Storage backplane
To Next Page
Loading...
