4-10 Sun Ultra 20 M2 Workstation Service Manual • January 2007
■ Select Tests
Opens a listing of the tests available for your workstation configuration and the
currently loaded test script.
■ Perform Burn-in Tests
Starts to run the currently loaded burn-in test script.
4.6 Deferred Burn-In Testing
You can use the Deferred Burn-in Testing option to create and save your own scripts
to run at a later time.
● From the main menu, choose Deferred Burn-in Testing.
The top portion of the window lists the options described in
TABLE 4-4, and the
bottom portion of the window lists the following Burn-in menu options:
■ Load Burn-in Script
Type one of the following:
■ quick.tst, noinput.tst,orfull.tst
■ If you created and saved your own script, type d:\testname.tst
Where testname is the name that you created.
■ Save Burn-in Script
To save a burn-in script that you created, type d:\testname.tst
Where testname is the name of the script that you created.
■ Change Options
Opens the Burn-in Options menu, which enables you to modify the various
options listed in
TABLE 4-4 for the currently loaded test script.
■ Select Tests
Opens a listing of all of the possible types of tests available for you to run for the
currently loaded test script.
To Next Page
Loading...
Need help?
General
